Official Documentation

Technical Data Reports

Certified test data, performance reports, and technical service documentation for Hi-Tech Roof Solutions products and coating systems.

Technical Service Report

National Testing Laboratories

ArmorShield Ultra Protector

Test Data — Granular Adhesion & Shingle Sealer

Technical Service Report · February 2026

National Testing Laboratories technical service report covering granular adhesion performance, shingle sealer formulation data, and field application test results for the ArmorShield Ultra Protector coating system.

Additional technical reports and certifications will be listed here as they become available.

What This Means for You

Permeability

24 U.S. Permsat 1.5 mils Dry Film Thickness

When it comes to roof coatings and building science, permeability measures how easily water vapor can pass through a material. Specifically, 24 U.S. Perms at 1.5 mils Dry Film Thickness (DFT) tells you two important things about how our sealant handles moisture:

1

It is "Breathable" (Vapor-Permeable)

In construction and roofing terms, any material with a perm rating greater than 10 is classified as highly vapor-permeable. At 24 perms, our sealant allows water vapor — humidity and trapped moisture from inside the building or deck — to escape outward into the atmosphere rather than getting trapped underneath the coating.

2

Why This Prevents Blistering and Rot

If a roof coating were completely "vapor-impermeable" (like a vapor barrier with a low perm rating under 1), any moisture trapped in the substrate or decking would heat up during the day, turn into vapor, expand, and push upward — causing blisters, bubbling, or peeling of the coating, as well as wood rot underneath. Because our product has a high rating of 24 perms at a 1.5-mil dry film thickness, that moisture can continuously "breathe" right through the membrane, keeping the roof structure dry and stable.